Sandwich Panel Price in Bangladesh
A transparent look at what EPS, PU and Rockwool panel really cost - and why the cheapest quote is rarely the cheapest build.
Sandwich Panel price in Bangladesh: what you are actually paying for
A Sandwich Panel price in Bangladesh is built from four variables: the core material (EPS, PU or Rockwool), the panel thickness, the steel skin and the length of the panel itself. Before you compare supplier quotes, it helps to know exactly which of these variables matter for your project - because two quotes for the "same" panel can differ wildly when the specification behind them differs.
What decides the price of a Sandwich Panel?
- Core type. EPS is the most affordable core, PU (PUF) costs more because of its closed-cell structure and low thermal conductivity, and Rockwool is the premium option thanks to its non-combustible mineral fibre.
- Thickness. A 50 mm panel costs less than a 150 mm panel of the same material. Choose the thickness the application actually needs - not the thickest one on the list.
- Steel skin and coating. Thicker galvanised steel and higher-grade polymer coatings survive Bangladesh weather and handling better, and they are quoted accordingly.
- Panel length and wastage. Custom lengths reduce on-site cutting, but every offcut is still paid for. Design the layout before you order.
- Order size and transport. Per-square-foot rates drop as volume rises, and transport is easier to absorb on a full-sized factory order than on a single room.
- Installation. Supply-only is cheaper per square foot than supply-and-install. Decide which you need before comparing prices.
Indicative price guide for EPS, PU and Rockwool panel
The ranges below are indicative factory-gate guide figures for planning only. Final pricing depends on your specification, order volume and delivery location, and is always confirmed by written quotation. For detailed technical data on each core, see our Sandwich Panel specifications.
| Core | Typical use | Relative cost |
|---|---|---|
| EPS | Factories, warehouses, boundary walls, affordable roofing | Lowest |
| PU (PUF) | Cold storage, freezers, air-conditioned facilities | Moderate |
| Rockwool | Fire-rated buildings, escape routes, high-safety industries | Highest |
As a rough planning rule, expect the price to rise with thickness and with core performance. A same-thickness PU panel will cost more than EPS, and Rockwool more than PU - the gap reflects the material cost of the core itself.
Hidden costs that change the final rate
- Transport beyond Dhaka. Nationwide delivery to Chittagong, Sylhet, Khulna or Rajshahi adds a logistics line to the quotation.
- Trims and accessories. Ridge capping, flashing, corner trims, screws and sealants are small items with a surprisingly large combined total.
- Wastage allowance. Standard panel are wide but fixed-length; an unplanned room dimension forces cutting and scrap.
- Installation labour. Professional crews work in pairs and charge per square foot; improvised labour costs less up front but risks joint quality.
Does a cheaper panel really save money?
Often, no. A thinner EPS panel in a fire-rated building, or a panel with a lightweight skin in a cyclone-prone coastal area, can fail early - and replacement costs far more than the premium you saved. Choose the panel the application demands, then shop among suppliers for the best honest price on that specification.
How to get the best Sandwich Panel price in Bangladesh
- Measure the full panel area of walls and roof - width, height and opening sizes.
- Decide core, thickness and skin grade using the EPS vs PU vs Rockwool comparison.
- Ask each supplier for one written quotation on the same specification.
- Compare the per-square-foot rate, transport and installation lines separately.
- Request a detailed quote from RPS Construction - we reply within one working day with a factory-direct rate.
Every RPS quote is written around your exact specification, including delivery within Bangladesh, so the price you see is the price you can plan around.